2014-08-25 (M) LEGO Virtual Reality Visor



Virtual reality visors are becoming more accessible and the Google Cardboard is proof that it doesn’t require fancy equipment to get the job done. Google Cardboard gives users a taste of what is possible with Virtual reality by providing a stereoscopic view of a phone. The official Cardboard App runs on Android phones. The viewer can work on any lit image placed in the contraption so it will work on a split screen iPhone app.

The accelerometer in the phone allows the user to look around in any direction. It’s a pretty good primer but doesn’t compare to the hardware of an Oculus Rift. The Cardboard doesn’t come standard with a head strap and it is expected that the Cardboard is to be held to the face like a View-Master. The trigger on the left side, a ring magnet, is reminiscent of the View-Master as well.

3D Images are fascinating to me so I wanted to make the experience even more accessible. The lenses I ordered were biconvex glass lenses with a 25mm diameter and a 45mm focal length. They should be the same ones used in Google Cardboard if you search on eBay.

Since this project used my phone as the screens and CPU I could not simultaneously use it for taking pictures. Instead I used a point-and-shoot digital camera for the photography which I kind of miss using. They are lower resolution pictures and they had to be transferred from a memory card but I could adjust all my settings manually and receive text messages without interruption. Perhaps I could invest in a better camera for this blog. Perhaps.

Another fun note, if you use a stereoscopic viewer on the spot-the-difference games which are side-by-side you can solve the puzzle in almost no time. Or cross your eyes until the images line up and all the differences will become apparent.

Enough background.
----------

Two sets of matched glass biconvex lenses were selected for this project. 25mm lenses were chosen because they were the lenses used in Google Cardboard so they are readily available from many retailers. 50mm lenses were chosen because they seem to be another common size. 50mm lenses also fit into inexpensive welding goggles which were tried as VR visors but would not provide adequate spacing options.



50mm lenses and 25mm lenses

 
Failed experiments with welding goggles and 50mm lenses

Spacing between the lenses was approximated by comparing to an imitation Google Cardboard and adjusting for the building blocks. The pieces selected were all among the basic shapes as often as possible. Once a lens-holding plane was established a base was build up to hold the plane off the phone surface but remain parallel to the phone’s screen. Once an ideal height was found structure was added to hold the phone in place.


 Correct spacing and for lenses


Method of attaching lenses

Correct height for device

Structures to hold phone in place


  Screen text visible through lenses

 Unit horizontal with phone installed


Unit vertical with phone installed

 Pieces holding phone down

Removing the phone

Swoosh

Rear shot without phone

Rear shot without phone from below

Comparison with Google Cardboard

Rotating views were taken to show the unit, phone installed, as it was vertical and horizontal. Photos were also taken to show the inside and phone removal.



To do:

  • Add side shields 
  • Add strap and padding 
  • Create instructions 
  • Take stereoscopic photos of device 
  • Build 50mm lens version


Journal page


The rest of the posts for this project have been arranged by date.

A list showing of all the final posts of COMPLETED projects.


This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.

This blog, including pictures and text, is copyright to Brian McEvoy.

Comments