2014-07-16 (W) Upcycled 3D Printer



A second hot glue gun was purchased for parts. This will not be factored into the final cost since the parts are included in a single gun. The new purchase was a low-temp version in case the high-temp version proves to be overpowered and because the physical size is identical. The needed piece is the flexible seal which goes over the opening to the heating chamber. The new gun was disassembled and indeed identical in every way except for the color and heating element.

Disassembled low-temp glue gun

The seal was installed on the printer but created a clearance issue with the glue stick feeder. The feeder was already having clearance issues with the chain so a new mounting method will need to be implemented which will likely involve drilling into the pie tin for support. The most obvious solution is to mount it upside-down after creating a five inch tall bracket.

Black seal on top of glue chamber

Glue pusher interfering with chain

Holding the glue pusher upside-down in place

Holding the glue pusher upside-down in place

Measuring a 5" [127mm] distance for the glue pusher to the pie tin

Video of attempt to make a print but failing

To do:
  • Flip platen or extruded u-nuts
  • Extend wires of waterServo
  • Make and install mount for waterServo
  • Correct + Install air tube
  • Test + Debug
  • Revise documentation

 Journal Page


The rest of the posts for this project have been arranged by date.

A list showing of all the final posts of COMPLETED projects.


This disclaimer must be intact and whole. This disclaimer must be included if a project is distributed.

All information in this blog, or linked by this blog, are not to be taken as advice or solicitation. Anyone attempting to replicate, in whole or in part, is responsible for the outcome and procedure. Any loss of functionality, money, property or similar, is the responsibility of those involved in the replication.

All digital communication regarding the email address 24hourengineer@gmail.com becomes the intellectual property of Brian McEvoy. Any information contained within these messages may be distributed or retained at the discretion of Brian McEvoy. Any email sent to this address, or any email account owned by Brian McEvoy, cannot be used to claim property or assets.

Comments to the blog may be utilized or erased at the discretion of the owner. No one posting may claim claim property or assets based on their post.


This blog, including pictures and text, is copyright to Brian McEvoy.

Comments